Strippa EVO Stem

Ensure there are even gaps at the top and bottom between the faceplate and the stem body. Tighten each bolt in a cross pattern, gradually increasing the tension, and tighten to 6Nm.

We offer a two-year warranty from the date of purchase, covering any defects in manufacturing. Please note, this warranty does not cover wear and tear.

No. The 35mm bar clamp is made in the 45mm length only, at 175g. If you want the shorter 35mm length you need the 31.8mm clamp, which weighs 142g; the same clamp in 45mm is 160g. Your handlebar decides which clamp you need, so check the centre section of the bar first — the two are not interchangeable.

The stack height for the Strippa EVO stem is 40mm, in every clamp and length combination. Rise is zero throughout.

All three are short, and they differ in stack height and weight. The Strippa EVO sits at 40mm stack and 142g to 175g — the tallest and heaviest of the three, and the one aimed at downhill and dirt jump. The Funnduro is the opposite end at 30mm stack and from 110g, for getting the bar as low as it goes. The Crossfire sits between them at 35mm stack and 125g to 156g, and is forged rather than fully machined.